Do You Know What LOGO Printing Technology Is?

- Jun 12, 2019-

As a kind of symbol, LOGO is not only a symbol of corporate culture, but also an advertising propaganda body. Therefore, whether a company or a group is customizing a backpack, it will require manufacturers to print their own LOGO on the product in order to improve The publicity effect of the company. When it comes to LOGO printing, do you know what LOGO printing technology is?

1.Hot stamping

Hot stamping also becomes embossing, which is to heat the product or hot stamp the corresponding pattern. This method is suitable for printing on paper, leather and other materials. This method can print both color LOGO and monochrome LOGO.


       2.Pad printing

Pad printing is to press the ink on the surface of the print head onto the product that needs to be printed. This method is suitable for printing on polyester fiber, cotton wool and other materials. This way, the printed LOGO has a strong three-dimensional sense, and the layers are fine and clear.


The film is produced by the tip discharge on the surface of the metal product. This method is suitable for the printing of materials such as metals or alloys, which is more beautiful than other methods to print LOGO on the metal surface.

4.Weaving and Embroidery

 This type of printing is actually a traditional machine embroidery with a needle embroidered picture. This method is suitable for all kinds of fabric products, it should be the modern technology closest to the ancient craftsmanship, but the way of working is changed from manual to machine. The LOGO embroidered in this way is very delicate, colorful, and the surface is flat and beautiful.

5.Silk screen

 the ink is printed on the product through a special grid to form a graphic. This method is widely used and most materials are suitable for this printing method. This method is not easy to damage the product, and the cost is also low.

 6.Laser marking

The basic principle of laser marking is that a high-energy continuous laser beam is generated by a laser generator, and the focused laser acts on the printing material to make the surface material melt instantaneously or even vaporize, by controlling the laser in the material. The path of the surface, thus forming the required graphic mark. Laser marking is characterized by non-contact machining, marking on any profiled surface, the workpiece will not deform and generate internal stress, suitable for marking metal, plastic, glass, ceramic, wood, leather and other materials. The cost of laser marking is relatively low, the speed is fast, and the effect is very good. Therefore, this technology is widely used in the printing of LOGO for backpacks.